IIIT Una (IIITU) · ECMC102
Basic Electrical and Electronics Engineering
Major core · L-T-P-C 3-0-2-4 · 3 h lectures · 2 h practicals a week · 4 credits
Units
Unit I
Electrical Circuits
Dependent and independent voltage sources and current sources, charging factor, power factor, Kirchhoff's Laws: KVL and KCL, Nodal and Mesh analysis, delta to wye and wye to delta transformations, Linear and non-linear devices, RL, RC & RLC circuits, sinusoids, ac fundamentals, power and energy, self and mutual inductances, and energy in coupled circuit, Q factor and bandwidth.
Unit II
Network Theorems
Source transformation, Superposition Theorem, Thevenin's theorem, Norton's theorem, Millman's theorem, Reciprocity theorem, Maximum power transfer theorem, Compensation theorem, Tellegen's theorem, and their applications.
Unit III
Semiconductor Diodes
Basics of semiconductors, intrinsic and extrinsic semiconductors, basic operation of a p-n junction diode, DC load line analysis, Rectifier circuits, filters (L, C, LC, π), Zener diode and its characteristics, Zener diode as a voltage regulator.
Unit IV
Bipolar Junction Transistors (BJTs)
Simplified structure, operation of n-p-n and p-n-p transistors, BJT as an amplifier and as a switch, Input and Output Characteristics of CE, CB, and CC configurations, DC load line analysis, selection of operating point (Q-point), gain (α, β, and γ), biasing techniques: fixed, emitter, voltage divider, collector feedback etc.
Unit V
Field Effect Transistor
Structure and basic operation of JFET, types (n-channel and p-channel), drain and transfer characteristics, structure and basic operation of MOSFET, types (depletion and enhancement), Drain and Transfer Characteristics, Comparison of BJT and FET.
Lab experiments
- Calibrate a given wattmeter by direct loading, verify Ohm's law for a BPLL element, calibrate a voltmeter and ammeter, calibrate a single-phase energy meter by direct loading.
- Verify Kirchhoff's laws.
- Verify network theorems; polarity test, voltage ratio test, open circuit test, short circuit test and load test on a single-phase transformer.
- Study the DSO, function generator, multimeter and DC power supply.
- Observe the V-I characteristics of a PN junction and a Zener diode.
- Study half-wave and full-wave rectifier circuits, without and with a capacitor filter.
- Observe the input and output characteristics of a transistor; DC-bias the transistor in common-emitter configuration and determine its operating point (i.e. various voltages and currents).
- Draw the transfer and drain characteristics of a JFET.
Books
Text books
- Electrical Circuit Theory and Technology, John Bird, Routledge, 6th edition, 2017
- Fundamentals of Electric Circuits, Charles K. Alexander and Matthew N. O. Sadiku, Tata McGraw Hill, 6th edition, 2018
- Engineering Circuit Analysis, W. H. Hayt and J. Kemmerly, McGraw Hill Education, 8th edition, 2013
- Electronic Devices and Circuit Theory, R. L. Boylestad and L. Nashelsky, Pearson Education, 10th edition, 2013
Reference books
- Circuits and Networks: Analysis and Synthesis, A. Sudhakar and S. S. Palli, McGraw-Hill Education, 2017
- Microelectronic Circuits, A. S. Sedra and K. C. Smith, Oxford University Press, 5th edition, 2009